XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Remove:
-
the 2 air ducts
-
the 4 screws for the stay in the dashboard
-
the cable. Pull it inwards into the passenger compartment.
Hint: Secure a cable using tape at the end of the engine compartment on the mechanical cable before pulling it out to make reinstallation easier. Route
the cable correctly in the engine compartment with someone to assist you.
Installation
Note! For tightening torques, see See: Specifications/Mechanical Specifications/Tightening Torque
Preparations for installation
Tape the cable to the new cable
Note! When installing the mechanical cable: Make sure that there are no sharp bends or kinks, especially in the cable's ends between the inner
cable and outer casing.
Hint: Route the cable correctly in the engine compartment with someone to assist you.
Installing the cable from the inside of the passenger compartment