XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Install the gear selector cables under the heater unit on the left-hand side, down towards the hole in the firewall.
Note! Be extremely careful when running the rubber bellows for the gear selector cables through the hole in the firewall. Do not damage the
gear selector cables.
Feed the gear selector cables through the hole slightly.
Hint: Have a colleague pull through the pre-routed cable.
Pull out the gear selector cables so that the rubber grommet is approximately 10 cm from the firewall.
Installing the gear selector cables and gear selector assembly
