XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Check that the clip is positioned in the groove as illustrated.
Installing the rubber grommet
Align the grommet on the studs. Install the M6 nuts.
Feeding in the gear selector cable from the engine compartment
Use the cable to correctly route the gear selector cables. The gear selector cable must be routed past the steering gear and up to the gearbox bracket.
Installing the centre tunnel console
Install the centre console. See Center console, replacing See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair.
Installing the gear selector cables on the gearbox
Note! Connect the gear selector cable with the white sleeve to the inner hole on the bracket and the inner lever to the gearbox.
Release the adjuster on the mechanical cable before installing it.
Install: