XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Remove the sealing rings from the transmission.
Note! Ensure that no debris enters the transmission.
Install new sealing rings in the transmission
Use petroleum jelly to hold the seals in position.
Checking the gear selector slider
Check that the lever for the gear selector slider is correctly positioned.
Installing the control system
Note! Ensure the lever for the gear selector is set to neutral.
Align the control system on the lever for the gear selector.
Install:
-
the screws for the control system
-
a new gasket for the cover on the control system. Note that the screws are of different lengths (measured in mm).
Tighten the screws alternately to light contact. Then tighten alternately. Tighten to 10 Nm.