XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
8. Remove the bleed nipple. Use a mandrel and a hammer.
9. Countersink the surface at the bleed hole to prevent the hole from becoming blocked by sealing compound. Use special tool 9814112.
10. Measure 3 mm (approx 1/8") from the inside of the flange and make a line with a permanent marker.
Note!
This procedure can be made easier by making a template which can be reused for several repairs.
Note!
General illustrations were used for steps 10, 11, and 12, but the method is the same.
