volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Drivetrain - Front Axle Pinging Noise On Garage Shifts|Page 7150 > < Drivetrain - Front Axle Pinging Noise On Garage Shifts|Page 7148
Page 3
background image

Remove:

-

the drive shaft screw. Use a screwdriver as a counterhold on the brake disc

-

the locating pin holding the brake disc

-

the brake disc. Detach the end of the drive shaft in the hub by knocking the drive shaft into the hub approximately 10-15 mm. Use a rubber or
copper mallet

-

the track rod ends from the steering arm.

Drivetrain - Front Axle Pinging Noise On Garage Shifts|Page 7150 > < Drivetrain - Front Axle Pinging Noise On Garage Shifts|Page 7148