XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Wiper Arm: Adjustments
Wiper arm, adjusting
Special tools:
951 2931 Protractor See: Tools and Equipment/951 2931 Protractor
Preparatory work
Check that the wipers are in the parked position. Switch the wipers on and off again with the ignition switched on.
Fold out the wiper arm.
Remove the wiper blade.
Install the tool (A): 951 2931 Protractor See: Tools and Equipment/951 2931 Protractor on the wiper arm (B), as illustrated.
Tighten the tool (A) to the wiper arm (B) using screw (C).
Fold the wiper arm and tool towards the windscreen.
Adjusting the wiper arm
Read the angle of the wiper arm to the windscreen from the scale of the tool.
Correct angle:
LHD -4°
RHD + 4°.
Caution! Do not damage the wiper arm surface. Use tape to protect the wiper arm.
Adjust the angle of the wiper arm as necessary. Turn the wiper arm using two wrenches as illustrated.
Fold the wiper arm out and remove the tool.
