XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
Press the wiper arm into place on the shaft journal
-
Screw the nut into place loosely
-
Adjust the wiper arm to the correct position. See the illustration.
Driver's side
The distance from the center of the wiper blade to the upper edge of the trim strip must be 75 mm.
Passenger side
The distance from the center of the wiper blade to the upper edge of the trim strip must be 90 mm.
-
Tighten the nut. Tighten to 20 Nm
-
Install the protective cover over the nut.
Note! Remove the masking tape from the wiper arms and the edge of the hood.
Windshield wiper blades
In reverse order.
Other information
To adjust the control arms. See Control links / wiper mechanism, adjusting See: Wiper Motor Linkage/Adjustments.
