Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)

Engine, Cooling and Exhaust > Cooling System > Coolant Line/Hose > Component Information > Technical Service Bulletins > All Other Service Bulletins for Coolant Line/Hose: > 3370019 > Mar > 03 > Campaign - Antitheft Wiring Harness Modification > Page 3615

Page 4
background image

Use removal tool 951 2637 to release the primary lock 
(see illustration).

Pull the cable gently backward while releasing the lock.

Caution!

Work on only one cable at a time to avoid interchanging 
cables.

Fitting the shrink sleeve

6

Slide a shrink sleeve into position, ensuring that it is 
positioned equally on each side of the damaged area.

Use hot air gun 951 2850 and nozzle 951 2779.

Set hot air gun to flow 2 and set the temperature between 2 and 3. 
Protect the surrounding components from heat. Position the 
shrink sleeve in the nozzle and heat so that the shrink 
sleeve seals tightly.

Note!

Take care not to overheat the sleeve or wire.

Engine, Cooling and Exhaust > Cooling System > Coolant Line/Hose > Component Information > Technical Service Bulletins > All Other Service Bulletins for Coolant Line/Hose: > 3370019 > Mar > 03 > Campaign - Antitheft Wiring Harness Modification > Page 3615

[PREV PAGE] [NEXT PAGE]