Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)

Engine, Cooling and Exhaust > Cooling System > Radiator > Component Information > Service and Repair > Procedures > Page 3667

Page 9
background image

Transfer the evacuation hose.
Applies to cars equipped with an extra oil cooler:
Transfer the oil cooler.

Installing the radiator

Position the radiator over the condenser and the charge air cooler (CAC).
Install the screws. Tighten to 10 Nm.

Installing the engine coolant fan (FC)

Install:

-

the engine cooling fan (FC)

-

the screws. Tighten to 10 Nm

-

the evacuation hose in the clip mountings.

Installing the cooler unit

Note! Two people are required for this procedure.

Lift up the air conditioning aggregate. Install the two mounting screws. Tighten to 24 Nm.

Note! Ensure that the air conditioning aggregate is positioned correctly in the locating pins on top of the aggregate.

Note! Ensure that no hoses are trapped when installing the air conditioning aggregate.

Installing the lower engine coolant hose

Install the hose. Tighten the clamp.
Remove the lock grip pliers.

Installing the air conditioning (A/C) pipe

Hint: Lubricate the O-rings using compressor oil.

Engine, Cooling and Exhaust > Cooling System > Radiator > Component Information > Service and Repair > Procedures > Page 3667

[PREV PAGE] [NEXT PAGE]