Volvo Workshop Manuals
XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
Engine, Cooling and Exhaust > Engine > Cylinder Head Assembly > Valve Clearance > System Information > Adjustments > Valve Clearance, Checking > Page 3179
Valve Clearance: Adjustments
951 2767 Roller See: Tools and Equipment/951 2767 Roller
Note! As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
Note! There are a number of versions of the variable valve timing unit. Therefore, it is extremely important to always read the information
Remove the cable from the battery negative terminal. First read Battery, disconnecting See: Starting and Charging/Battery/Service and
Note! Note the valve clearance in the inspection form!
the cross stay between the suspension turrets
the ground strip from the cylinder head
the upper engine stabilizer brace
the cover in the cylinder head at the rear of the exhaust camshaft
the crankcase ventilation hose from the top of the camshaft cover
the radiator breather tube from the expansion tank. Install lock grip pliers.
Lift up the brake fluid reservoir.
Warning! Make sure that no fluid is spilled on the engine. It is extremely flammable!
Disconnect the connector for the level sensor in the expansion tank.
|[PREV PAGE] [NEXT PAGE]|