Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)

Engine, Cooling and Exhaust > Engine > Drive Belts, Mounts, Brackets and Accessories > Drive Belt > Component Information > Service and Repair

Page 1
background image

Drive Belt: Service and Repair

Auxiliaries belt / belt tensioner, replacing

Note! Since the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.

Removal

Removing the auxiliaries belt

Relieve the belt.999 7109 Wrench See: Tools and Equipment/999 7109 Wrench 
Remove the belt

Replacing the belt tensioner

Remove:

-

both mounting screws from the auxiliaries belt bracket for the belt tensioner

-

the belt tensioner. Install the new belt tensioner. Tighten.

Installation

Note! For tightening torques, see Specifications See: Specifications/Mechanical Specifications/Tightening Torque.

Installing the auxiliaries belt

Engine, Cooling and Exhaust > Engine > Drive Belts, Mounts, Brackets and Accessories > Drive Belt > Component Information > Service and Repair

[PREV PAGE] [NEXT PAGE]