XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
Oil Cooler: Service and Repair
Oil cooler, replacing
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information is always correct.
Oil cooler, removing:
Raise the car.
the lower splash guard.
Clamp both the oil cooler coolant hoses together with lock grip pliers.
the coolant hoses from the oil cooler
the oil cooler mounting screws.
Note! Collect the oil that drains from the oil cooler and any coolant.
Lift down the oil cooler.
Oil cooler, installing:
Use new seals.
The seals must be greased prior to installation.
the oil cooler.
Screw the 4 oil cooler screws into place.
Tighten to: 17 Nm
the coolant hoses.
Remove the lock grip pliers.
Screw the splash guard into place.