Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)

Engine, Cooling and Exhaust > Engine > Timing Components > Timing Belt > Component Information > Service and Repair > Removal and Replacement > Page 3395

Page 2
background image

Remove the 4 screws. Use the crankshaft centre nut as a counterhold.
Install the counterhold 999 5433 COUNTERHOLD See: Tools and Equipment/999 5433 Counterhold and remove the center nut.
Remove counterhold 999 5433.
Work the vibration damper loose.

Removing the timing belt

Slacken off the centre screw for the belt tensioner slightly.
Hold the centre screw secure. Turn the belt tensioner eccentric clockwise with a 6mm Allen key to 10 o'clock.
Remove the timing belt from the timing gear pulley for the camshafts.
Remove the timing belt.

Removing the crankshaft pulley

Use puller 999 5304 SEPARATOR See: Tools and Equipment/999 5304 Separator and two screws (M8 x 45 mm) with washers.
Pull off the timing gear pulley.

Caution! The crankshaft must not rotate!

Removing the belt tensioner and idler pulley

Engine, Cooling and Exhaust > Engine > Timing Components > Timing Belt > Component Information > Service and Repair > Removal and Replacement > Page 3395

[PREV PAGE] [NEXT PAGE]