Do Not Sell My Personal Information
volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 10
background image

Check

Press the toothed belt to check that the indicator on the tensioner moves easily.

Installing the vibration damper

Install the vibration damper. Use counterhold 999 5433 COUNTERHOLD See: Tools and Equipment/999 5433 Counterhold.
Tighten the centre nut to 180 Nm.
Remove counterhold 999 5433.
Tighten the four screws. Tighten to 25 Nm. Angle tighten 30°. Use the crankshaft centre screw as a counterhold.

Checking the markings and belt tension

Engine, Cooling and Exhaust > Engine > Timing Components > Timing Belt > Component Information > Service and Repair > Removal and Replacement > Page 3403

< PREV PAGE NEXT PAGE >