Volvo Workshop Manuals
XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
Engine, Cooling and Exhaust > Engine > Tune-up and Engine Performance Checks > Valve Clearance > System Information > Adjustments > Valve Clearance, Checking > Page 3536
Turn the crankshaft in the direction of engine rotation until the next marking In2/Ex5 is opposite the flange on top of the cylinder head. Perform the test
Note! For tightening torques not in the text, see Tightening torque See: Specifications/Mechanical Specifications/Tightening Torque.
the plugs for the test holes. Tighten to 20 Nm
the ignition coils according to the earlier markings
the ground connections
the connector for the variable valve timing solenoid.
Remove tool 999 5754 Camshaft pos. See: Tools and Equipment/999 5754 Camshaft Pos..
Install (naturally aspirated engine)
the trigger wheel. Tighten to 17 Nm.
Note! Ensure that the trigger wheel is correctly positioned against the camshaft.
the camshaft position (CMP) sensor housing
|[PREV PAGE] [NEXT PAGE]|