Do Not Sell My Personal Information
volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 7
background image

Tighten to 12 Nm

-

install the auxiliaries belt

-

reinstall the servo reservoir and the expansion tank.

Ensure that the hoses are correctly positioned

-

the engine stabilizer brace. Tighten the screws at the suspension turrets. Tighten to 50 Nm.Tighten the screw for the engine bracket. Tighten to 80
Nm

-

the cover in the fender liner

-

the wheel. See Installing wheels See: Maintenance/Wheels and Tires/Wheels/Service and Repair.

Fill the cooling system with Volvo original coolant.
Wipe clean and check the engine compartment.

Checking work

Function test

-

Warm up the engine until the thermostat opens

-

Top up the cooling system if necessary.

Check for leaks.

Engine, Cooling and Exhaust > Engine > Water Pump > Component Information > Specifications > Page 3559

< PREV PAGE NEXT PAGE >