XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
Connect the bleeding unit. Brake system, bleeding (using bleeding unit) See: Brake Bleeding/Service and Repair/Brake System, Bleeding (Using
Bleeding Unit). Open the bleed nipple on the caliper. Wait until there is new oil in the plastic hose. Close the bleed nipple
Press down the brake pedal to the limit position. Keep it pressed down for approximately 2 seconds before releasing it. Repeat until there is new brake
fluid in the plastic hose.
Close the bleed nipple when the brake pedal is fully depressed.
Remove the hose.
Install the protective cap.
Repeat the process with the other rear wheel
Install the wheel. See: Installing wheels See: Wheels and Tires/Wheels/Service and Repair.