XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
Hint: The rear panel in the side panel of the cargo compartment can be removed to change fuses.
Relay and fuse location, 11D
For the location of the relays and fuses, see:
1. Wiring diagram for relevant model year
2. Decals at both the integrated relay box and fusebox in the car
3. Pocket data book
4. Owner's Manual.
Installing the integrated relay/fusebox in the cargo compartment
Align the integrated relay/fusebox in the grooves in the bracket and press into place.
Install the left side panel in the cargo compartment.
Replacing the rear electronic module (REM)
The rear electronic module (REM) is a separate unit in the relay box in the cargo compartment.
Caution! New software can only be ordered when the control module is installed in the car. VIDA reads off the new control module identity
which is required to order the correct software.
Release the relay and fuse box. See Exposing the integrated relay/fusebox in the cargo compartment.
Removing the control module