Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)

Maintenance > Fuses and Circuit Breakers > Relay Box > Component Information > Service and Repair > Central Electrical Unit Engine Compartment > Page 2873

Page 5
background image

Detach the bottom section from its mounting by the spring strut housing by pressing it in towards the engine compartment.

Installation

Note! For tightening torques, see Specifications See: Specifications/Mechanical Specifications/Starting and Charging/System Specifications.

Installing the bottom section

Install:

-

bottom section

-

the screws

-

the air cleaner (ACL) housing.

Installing the relay/fuse holder

Install:

-

the cable terminals for the main terminals

-

the relay/fuse holder. Check that the rubber seals are correctly positioned

-

the screws as illustrated. Tighten screw 4. Tighten to 2 Nm

-

the battery leads

-

the nut for the battery leads.

Finishing work

Install:

-

the cover for the fusebox

-

the battery negative pole. Tighten according to Tightening torque See: Specifications/Mechanical Specifications/Starting and Charging/System
Specifications. Also see Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting.

Maintenance > Fuses and Circuit Breakers > Relay Box > Component Information > Service and Repair > Central Electrical Unit Engine Compartment > Page 2873

[PREV PAGE] [NEXT PAGE]