Volvo Workshop Manuals
XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
Maintenance > Tune-up and Engine Performance Checks > Valve Clearance > System Information > Adjustments > Valve Clearance, Checking > Page 2476
Use only a gasket scraper or razor blade on the cylinder head.
Caution! Be very careful around the oil channels for the variable valve timing solenoid. This applies to both the camshaft cover and the
Dry and blow all surfaces clean.
Carefully tap the end of the valve stem to ensure that the valve is correctly located in the seat.
Installing the camshaft and tappet
Install both the tappets for the inlet valves at cylinder 1.
Note! Only install two tappets. The tappets should be placed by the same cylinder!
|[PREV PAGE] [NEXT PAGE]|