XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
Disconnect the connector and cut the conductor at the damaged point.
If the conductor needs to be lengthened, use the same gauge
wire. Strip about 6 mm of the insulation from the conductor
Displacement of joints
Locate all butt joints with a relative displacement to
each other. There should be no overlap.
Crimping the joint
Insert the butt joint in the crimping tool 951 2785 (red opening).
Squeeze the tool slightly and push the conductor into the sleeve
as far as it will go.
Crimp the joint.
Pull gently on the cable to ensure that it is secure.
Shrinking the joint