Volvo Workshop Manuals
XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
Powertrain Management > Computers and Control Systems > Relays and Modules - Computers and Control Systems > Body Control Module > Component Information > Service and Repair > Central Electrical Unit Engine Compartment > Page 4987
Release the upper catches using a weatherstrip tool. Lift out the control module.
Note! Check that the control module's connectors are intact.
Installing the passenger door module (PDM)
Press the control module into place.
the nut and screw
the door panel, see Panel front side door, replacing See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and
Order software for the passenger door module (PDM). See: Testing and Inspection/Programming and Relearning/Software Downloading
Initialize the window position in the communication input.
Relay/Fuse Box Cargo Compartment/Rear Electronic Module (REM), Replacing
Relay/fuse box cargo compartment/Rear electronic module (REM), replacing
Note! As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
Exposing the integrated relay/fusebox in the cargo compartment
Switch off the ignition.
|[PREV PAGE] [NEXT PAGE]|