XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
Release the upper catches using a weatherstrip tool. Lift out the control module.
Note! Check that the control module's connectors are intact.
Installing the passenger door module (PDM)
Press the control module into place.
the nut and screw
the door panel, see Replacing the front door side panel See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service
Order software for the passenger door module (PDM) according to the table below.
Initialize the window position in the communication input.
Passenger Door Module (PDM), Replacing
Passenger door module (PDM), replacing
Caution! New software can only be ordered when the control module is installed in the car. VIDA reads off the new control module identity
which is required to order the correct software.