XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
Remove:
-
the lever for the gear shift linkage rod
-
the nut, locking washer and rubber seal securing the gear-shift position sensor to the gear shift linkage rod
-
the 2 screws
-
the gear-shift position sensor.
Installation
Note! For tightening torques, see See: Specifications/Mechanical Specifications/Automatic Transmission/Transaxle/System Specifications/Tightening
Torque
Installing the gear-shift position sensor
Install:
-
the sensor. Lightly tighten the 2 screws
-
the rubber washer, the lock washer and the nut on the sensor.
Tighten the nut. Lock the nut with the locking washer.
Adjusting the gear-shift position sensor
Adjust the gear-shift position sensor. See See: Adjustments
Installing the lever and the gear-shift position sensor