Volvo Workshop Manuals
XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Entertainment System Control Module > Component Information > Technical Service Bulletins > Page 313
Press the infotainment unit into place on the bracket.
Note! The connectors for the CD and MD-control modules are identical and can be switched.
Note! Check that there is no dirt in the optic connectors.
Note! The bend radius of the optic cables must not be less than 25mm.
Angle in the infotainment / dashboard environment panel and bracket.
Hint: Align the upper section, press upwards, angle in the lower section.
Install the screws in the lower section of the bracket and tighten.
Note! After replacing the infotainment control module (ICM)/display, new software must be ordered and programmed.
|[PREV PAGE] [NEXT PAGE]|