Volvo Workshop Manuals
XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Body Control Module > Component Information > Service and Repair > Central Electrical Unit Engine Compartment > Page 777
Relay and fuse location, 11D
For the location of the relays and fuses, see: See: Power and Ground Distribution/Locations
1. Wiring diagram for relevant model year
Installing the integrated relay/fusebox in the cargo compartment
Align the integrated relay/fusebox in the grooves in the bracket and press into place.
Replacing the rear electronic module (REM)
The rear electronic module (REM) is a separate unit in the relay box in the cargo compartment.
Caution! New software can only be ordered when the control module is installed in the car. VIDA reads off the new control module identity
Release the relay and fuse box. See Exposing the integrated relay/fusebox in the cargo compartment.
Removing the control module
Unscrew the screw holding the connector so that it is free of its threads. Check that the screw is free with your fingers.
Note! Do not damage the pins. Always check that the control module's and control module box's connectors do not have bent or damaged pins
|[PREV PAGE] [NEXT PAGE]|