Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)

Relays and Modules > Relays and Modules - Steering and Suspension > Relays and Modules - Steering > Steering Mounted Controls Communication Module > Component Information > Testing and Inspection > Reading and Clearing Diagnostic Trouble Codes > Page 1248

Page 31
background image

-------------------------------------------------

Checking components and wiring 4

Check the voltage between terminals #B1 and #B3. Voltage must be approximately 12 V.
Check the voltage between terminals #B2 and #B3. Voltage must be approximately 5 V.
Check the voltage between terminal #B3 and the battery negative terminal. Voltage must be approximately 0 V.
If the above readings are OK, the fault is in the cruise control switch.

Other information:

-

To connect the breakout box, see Connecting the breakout box See: Pinout Values and Diagnostic Parameters/Connecting the Breakout Box.

-------------------------------------------------

Fault-Tracing Information

Fault-tracing information

Relays and Modules > Relays and Modules - Steering and Suspension > Relays and Modules - Steering > Steering Mounted Controls Communication Module > Component Information > Testing and Inspection > Reading and Clearing Diagnostic Trouble Codes > Page 1248

[PREV PAGE] [NEXT PAGE]