Volvo Workshop Manuals
XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
Sensors and Switches > Sensors and Switches - HVAC > Refrigerant Pressure Sensor / Switch, HVAC > Component Information > Locations > Page 1743
Refrigerant Pressure Sensor / Switch: Service and Repair
Pressure sensor receiver drier, replacing
Note! Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However,
Draining the coolant and removing the splash guard
Warning! Follow the safety instructions for work on air conditioning systems. See: Refrigerant, safety regulations See: Heating and Air
Note! First read the instructions covering slow and fast leaks. See See: Heating and Air Conditioning/Service Precautions/Vehicle Damage
Note! Always plug the pipes and connections when working on the climate control system.
Drain the refrigerant from the system. See Refrigerant, draining See: Heating and Air Conditioning/Service and Repair/Refrigerant, Draining.
Removing the skidplate
Remove the 6 screws.
Note! There is a guide sleeve on the upper mounting for the plate. This must be lifted slightly so that the panel can be slid forward.
Removing the pressure sensor
|[PREV PAGE] [NEXT PAGE]|