Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)

Sensors and Switches > Sensors and Switches - Instrument Panel > Fuel Gauge Sender > Component Information > Service and Repair > Level Sensor, Fuel Tank, Right-Hand/Fuel Tank, Replacing > Page 1773

Page 6
background image

Install the wire on the new ejector for the level sensor and pump.
Install a new O-ring, lubricated with lubricant, P/N 1161580.
Insert the hoses and wiring into the tank via the right-hand tank hole.
Grip the right-hand level sensor and pump holder and pinch it so that the float is held in its lowest position.
Carefully and slowly lower the holder. Carefully work the holder into place.
Pull the wire so that the hoses and wiring end up on the left side of the tank.

Level sensor right-hand continued

Sensors and Switches > Sensors and Switches - Instrument Panel > Fuel Gauge Sender > Component Information > Service and Repair > Level Sensor, Fuel Tank, Right-Hand/Fuel Tank, Replacing > Page 1773

[PREV PAGE] [NEXT PAGE]