XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
Brake Light Switch: Testing and Inspection
Checking brake light switch adjustment
VIDA connected to the vehicle.
Start the engine.
Activate readout of components by clicking on the symbol for VCT2000.
Slowly press down the brake pedal.
Check the pedal position sensor's value when the brake light switch status changes from Off to On.
The pedal position sensor shall have a value of at least 0.8 mm when the brake light switch status changes from Off to On.
If the pedal position sensor's value is below the value given above, the brake light switch shall be readjusted.
To adjust the brake light switch: Stop lamp switch, replacing See: Service and Repair.
Continue - Procedure complete
Numeric Result 0 - Communication fault