volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 2
background image

Install:

-

the thermostat housing. Use a new gasket

-

the connector for the sensor

-

the servo pump

-

the delivery line for the power steering pump

-

the upper timing belt cover.

Finishing

Remove the hose clip.
Fill with coolant.
Install the cap on the expansion tank.
Test drive the engine until the thermostat has opened.
Check for leakage.
Top up the coolant and oil if necessary.

Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Coolant Temperature Sensor/Switch (For Computer) > Component Information > Service and Repair > Replacing the Thermostat and/or Engine Coolant Temperature Sensor > Page 1904

< PREV PAGE NEXT PAGE >