Volvo Workshop Manuals
XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
Sensors and Switches > Sensors and Switches - Transmission and Drivetrain > Sensors and Switches - A/T > Transmission Temperature Sensor/Switch, A/T > Component Information > Locations > Page 2139
the return line to the control system cover
the cable harness to the holder on the cover
the ground lead for the gearbox.
Installing the sub-frame
Install the sub-frame. See: Sub-frame front, replacing See: Body and Frame/Frame/Subframe/Front Subframe/Service and Repair.
the screw for the gear-shift position sensor and holder. Tighten to 25 Nm
the lever for the gear shift linkage rod. Tighten the nut. Tighten to 16 Nm
the mechanical gearbox cable on the lever.
Installing the air cleaner (ACL) housing
Install the air cleaner (ACL) housing, including all hoses and electrical terminals. See Gear selector cables, replacing See: Transmission and
Note! After replacing the transmission oil, the "Transmission oil change" counter must be reset. See Transmission fluid, replacing See:
Diagnostic trouble codes (DTCs)
Check any diagnostic trouble codes (DTCs).
|[PREV PAGE] [NEXT PAGE]|