XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Install the connector with cables on the back-up lamp switch.
Install a tie-strap as illustrated so that the cable harness is not in contact with the gear selector cable.
Install the bracket on the gearbox using the 3 M8 screws. Tighten.
Finishing
Installing the gear selector cables
Install the air cleaner (ACL) housing and the gear selector cables. See Gearbox cables, replacing See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Shift Linkage/Shift Cable/Service and Repair/Gearbox Cables, Replacing.
