volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Key Cylinder Lamp > < Diagram Information and Instructions|Page 28095
Page 1
background image

Horn: Service and Repair

Horn, replacing

Removal

Preparatory work

Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.

Remove the right-hand headlamp.  See: Headlamp/Headlamp Bulb/Service and Repair/Headlight/Bulb, Replacing

Removing the horn

Hint: Remove one of the horns from the bracket to facilitate removal and installation.

Slacken of the screw for the bracket.
Angle out the horn and the bracket.
Disconnect the connector.

Installation

Installing the horn

Connect the connector.
Horn and bracket.
The screw. Tighten

Finishing work

Install the right-hand headlamp.  See: Headlamp/Headlamp Bulb/Service and Repair/Headlight/Bulb, Replacing

Test the function.

Key Cylinder Lamp > < Diagram Information and Instructions|Page 28095