volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 2
background image

Note! Make a note of the routing of the belt.

Remove the auxiliaries belt. Use: 999 7109 Wrench See: Tools and Equipment/999 7109 Wrench.

Replacing the belt tensioner

Remove:

-

both mounting screws from the auxiliaries belt bracket for the belt tensioner

-

the belt tensioner.

Install:

-

a new belt tensioner

-

the screws for the belt tensioner. Tighten.

Installation

Note! For tightening torques, see Specifications See: Engine, Cooling and Exhaust/Engine/Specifications/Mechanical Specifications/Tightening
Torque.

Installing the auxiliaries belt

Note! Ensure that the auxiliaries belt is correctly positioned on all the pulleys.

Install the auxiliaries belt. Use: 999 7109 Wrench See: Tools and Equipment/999 7109 Wrench.

Installing the engine control module (ECM)

Maintenance > Drive Belt > Component Information > Service and Repair > Page 4439

< PREV PAGE NEXT PAGE >