Do Not Sell My Personal Information
volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 2
background image

Remove:

-

the filter insert from the housing

-

the O-ring that seals between the housing and the oil trough.

Allow the filter insert to drain and then discard it in an approved place.

Installing the oil filter

Caution! Clean the housing.

Install:

-

a new filter insert

-

a new O-ring. Lubricate the O-ring

-

the oil filter housing. Tighten to Tightening torque See: Engine, Cooling and Exhaust/Engine/Specifications/Mechanical Specifications/Tightening
Torque.

Install the lower cover.

Filling with engine oil

Lower the vehicle and fill with oil. See 

Check:

Start the engine and check for oil leakage.
Stop the engine and give the oil time to run down into the oil pan.
Then check the oil level. Top up if necessary but do not overfill. Wipe the engine compartment clean. Ensure that the steering wheel and the gear
selector lever are clean.

Maintenance > Fluids > Engine Oil > Component Information > Specifications > Page 4621

< PREV PAGE NEXT PAGE >