XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Fuel Pressure: Testing and Inspection
Checking Fuel and Residual Pressures
Checking fuel and residual pressures
Note! To check the fuel and residual pressures for S70/V70/C70, see See: Powertrain Management/Fuel Delivery and Air Induction/Testing and
Inspection/Fuel System Pressure, Checking
Note! For vehicles with demand activated fuel pumps (FP), see VIDA vehicle communication Quick test of fuel pump (FP).
Measuring the line pressure
Connect the pressure gauge according to Fuel pressure gauge See: Fuel Pressure Gauge
Remove the soundproofing panel
Remove the fuel pump (FP) relay (CMI 12 in the passenger compartment)
Connect a cable to the relay base as illustrated.
Read off the line pressure from the pressure gauge. The line pressure must be 375-395 kPa.
Check the residual pressure if the fuel pressure is OK.
Remedy as necessary.
For the location of and to replace the fuel pump (FP) relay, see Central electronic module (CEM), replacing See: Body and Frame/Body Control
Systems/Body Control Module/Service and Repair
For the location of and to replace the fuel pump (FP), see See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Pump/Service and
For the location of and to replace the fuel filter, see Replacing the fuel filter See: Fuel Filter/Service and Repair
To disconnect the pressure gauge, see Fuel pressure gauge See: Fuel Pressure Gauge
Checking the residual pressure