Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)

Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Central Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Central Control Module: > TNN37-35 > May > 06 > Central Electrical Module - DTC's Set/Systems Errors > Page 166

Page 4
background image

Installing the cover

Note

After installation, the cable harness under the cover will be slightly over length. Clamp it up in a suitable manner to prevent chaffing.

Tighten the screws to 10 Nm. 

Note

There is a risk of altering the brake light switch adjustment when working in the pedal box area. Please verify that the brake light adjustment is
correct after the work is performed.

Use the method in VIDA/ Vehicle communication/ BCM/ Advanced/ checking brake light switch adjustment.

Method 2 (installation of superceded harness)

Parts required;

^

Engine bay cable harness, check VIDA parts catalogue

(This will be superseded engine bay harness with an integrated cover and grommet)

Remove and discard the existing surround.

Save the screws to attach the new cover to the
plenum floor.

Install the harness as per VIDA instruction

Install the integrated harness cover

Tighten the screws to 10 Nm.

Note; There is a risk of altering the brake light switch adjustment when working in the pedal box area. Please verify that the brake light adjustment is
correct after the work is performed using the method in VIDA/ Vehicle communication/ BCM/ Advanced/ checking brake light switch adjustment

Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Central Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Central Control Module: > TNN37-35 > May > 06 > Central Electrical Module - DTC's Set/Systems Errors > Page 166

[PREV PAGE] [NEXT PAGE]