Volvo Workshop Manuals
XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Relays and Modules > Relays and Modules - Power and Ground Distribution > Relay Box > Component Information > Diagrams > Diagram Information and Instructions > Page 1215
NOTE: Do not fill the protective cover with grease.
Press grease, P/N 1161417-9, into the female sockets directly from tube
Check that all the terminal cavities are filled
Use a loose male pin to ensure that the connection in the sockets is good. The pin should remain in position when pulled gently.
Open-Circuit, Permanent Faults
Open-circuit, permanent faults
An open-circuit in a cable is indicated by a loss of one or more functions.
Repair wiring and cable terminals, using appropriate procedures.
Disconnect the connectors at both ends of the cable.
Connect an ohmmeter between the ends of the cable.
If the reading is not correct. Replace the cable and/or continue, according to "Contact Resistance and Oxidation"
|[PREV PAGE] [NEXT PAGE]|