Volvo Workshop Manuals
XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Body Control Module > Component Information > Service and Repair > Central Electrical Unit Engine Compartment > Page 1416
Order software. See: Testing and Inspection/Programming and Relearning/Software Downloading
Program in the data read off from the old control module (customer-programmed data for example). This is performed via VIDA vehicle communication.
For the location of other relay and fuse boxes, see: Relays, fuse boxes and wiring See: Power and Ground Distribution/Locations.
Door Module (Power Windows, Power Mirrors, Child Locks, Central Locking), Front Doors
Door module (power windows, power mirrors, child locks, central locking), front doors
Replacing the driver door module (DDM) and passenger door module (PDM)
Caution! New software can only be ordered when the control module is installed in the car. VIDA reads off the new control module identity
Always check that the control module and control module box connectors do not have bent or damaged terminals or socket/sleeves. This may have been
Removing the control module
This method of removal applies to both the driver door module (DDM) and the passenger door module (PDM).
|[PREV PAGE] [NEXT PAGE]|