Volvo Workshop Manuals
XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Sensors and Switches > Sensors and Switches - Accessories and Optional Equipment > Arm/Disarm Switch, Antitheft > Component Information > Diagrams > Diagram Information and Instructions > Page 2485
A fiber requires a larger bend radius than a copper cable. The bend radius must not be less than 25 mm. If the fiber bends too much, not enough light
Note! Fiber optics must not be spliced. Damaged fiber optics can be repaired if there is sufficient length remaining to install a new ferrule (4). If
Note! Fiber optics are sensitive to bending and pinching. Be careful when routing and securing.
Disassembling the connector (2)
|[PREV PAGE] [NEXT PAGE]|