Volvo Workshop Manuals
XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Braking Sensor/Switch > Component Information > Service and Repair > Pedal Position Sensor, Replacing > Page 2731
Note! Check that the snap ring is in position in the groove. Check that the ends of the snap ring lie against the stop lug.
The O-ring on the sensor
lubricate the O-ring lightly using a soap solution
the sensor for the power brake booster so that the locking lug goes into position.
Gently pull the sensor. Check that the sensor is secure.
|[PREV PAGE] [NEXT PAGE]|