XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Wheel Speed Sensor: Service and Repair
Pulse Wheel Drive Shaft, Replacing
Pulse wheel drive shaft, replacing
Special tools:
999 5695 Socket See: Tools and Equipment/999 5695 Socket
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
Preparation
Remove the drive shaft. See Replacing the front right drive shaft See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft
Assembly/Service and Repair/Drive Shaft Right, Replacing or Replacing the front left drive shaft See: Transmission and Drivetrain/Drive Axles,
Bearings and Joints/Axle Shaft Assembly/Service and Repair/Drive Shaft Left, Replacing.
Removing the pulse wheel
Secure the drive shaft in a vise with soft jaws.
Tap off the pulse wheel using a hammer and a cold chisel.
Installing the pulse wheel