Volvo Workshop Manuals
XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Sensors and Switches > Sensors and Switches - Cooling System > Engine - Coolant Temperature Sensor/Switch > Coolant Temperature Sensor/Switch (For Computer) > Component Information > Service and Repair > Temperature and Pressure Sensors, Replacing > Page 3074
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
Thermostat/temperature sensor, engine coolant, replacing
951 2885 Sleeve See: Tools and Equipment/951 2885 Sleeve
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
Removing the engine coolant temperature (ECT) sensor
the upper timing belt cover. Disconnect the connector for the temperature sensor
the temperature sensor from the thermostat housing. Use 951 2885 Sleeve See: Tools and Equipment/951 2885 Sleeve.
Note! Put paper underneath the sensor to prevent coolant spillage.
Installing the engine coolant temperature (ECT) sensor
the sensor with a new seal. Tighten. See: Tightening torque See: Engine, Cooling and Exhaust/Engine/Specifications/Mechanical
the upper timing belt cover.
|[PREV PAGE] [NEXT PAGE]|