XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Note! Insert the cable harness and the occupant weight sensor through the seat base.
the 2 screws. Tighten
the connector at the end mounting
the connectors on the multi-connector
the pressure sensor/silicone cushion on the bracket under the seat. Secure the silicone hose in the clip/holder
the pressure sensor/silicone cushion using 2 clips
the seat cushion. Fold down and secure the upholstery. See: Upholstery seat cushion, replacing See: Body and Frame/Seats/Seat Cover/Service and
Repair/Front Seat, Driver's Seat, Front Seat/Upholstery Seat Cushion, Replacing
the battery negative lead. See: Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting.
Storing the ID number for the occupant weight sensor (OWS)
Caution! Store the ID number for the occupant weight sensor (OWS). See VIDA vehicle communication.
Calibrating the Occupant weight sensor (OWS)
Warning! Calibrate the Occupant weight sensor (OWS). See VIDA vehicle communication.