Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)

Sensors and Switches > Sensors and Switches - Transmission and Drivetrain > Sensors and Switches - A/T > Transmission Position Switch/Sensor, A/T > Component Information > Locations > Page 3987

Page 1
background image

Transmission Position Switch/Sensor: Service and Repair

Gear-shift position sensor, position

Special tools:

999 7077 Jimmy bar See: Tools and Equipment/999 7077 Jimmy Bar 

Note! As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information is always correct.

Removal

Removing the air cleaner (ACL) housing

Ignition off.
Remove the air cleaner housing ACL assembly with the intake pipe.

Removing the gear selector cable and connector

Remove the transmission cable from the lever. Use jimmy bar 999 7077 Jimmy bar See: Tools and Equipment/999 7077 Jimmy Bar and the cable
mounting from the transmission.
Unhook the mounting and the connector for the transmission from the bracket.
Remove the tie straps for the cable harness and the mounting in the cover for the control system.
Separate connector A for the gear-shift position sensor. Remove the gear-shift position sensor from the mounting.

Removing the gear-shift position sensor

Sensors and Switches > Sensors and Switches - Transmission and Drivetrain > Sensors and Switches - A/T > Transmission Position Switch/Sensor, A/T > Component Information > Locations > Page 3987

[PREV PAGE] [NEXT PAGE]