Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)

Sensors and Switches > Sensors and Switches - Wiper and Washer Systems > Rain Sensor > Component Information > Diagrams > Diagram Information and Instructions > Page 4264

Page 83
background image

Connector, assembling

Primary locking

Check that the cable terminal is undamaged.
Press the cable terminal into the housing.
Check that the seal is correctly positioned and that the cable terminal is properly locked by pulling carefully on the cable.

Sealed Connector Type 2

Connector sealed, repair

Special tools: 951 2632 Terminal removal tool See: Tools and Equipment/951 2632 Terminal Removal Tool , 951 2639 Terminal removal tool See:
Tools and Equipment/951 2639 Terminal Removal Tool , 951 2852 Terminal removal tool See: Tools and Equipment/951 2852 Terminal Removal Tool
, 951 2853 Terminal removal tool See: Tools and Equipment/951 2853 Terminal Removal Tool.

Note! As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information in the illustrations is always correct.

Connector, dismantling

Secondary lock

Open the catches and pull out the secondary lock, use tool 951 2853 Terminal removal tool See: Tools and Equipment/951 2853 Terminal Removal Tool
or an electrician's screwdriver, as illustrated.

Primary lock

Sensors and Switches > Sensors and Switches - Wiper and Washer Systems > Rain Sensor > Component Information > Diagrams > Diagram Information and Instructions > Page 4264

[PREV PAGE] [NEXT PAGE]