XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
2.
Checking/adjusting B+ cable
Caution! Do not use any tools that conduct
electricity.
Check with a Bone Tool 9814071 or similar.
The distance between the B+ cable and the
solenoid on the starter motor must be at least
4 mm.
If the distance is too small, pull the cable
upward until the tool can be inserted easily.
3.
Install inlet pipe
Note! Only applies to XC90:
Install the inlet pipe and screws, 2 pcs.
Tighten with 10 Nm.
