XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Finishing
Install the cable harness. Connect the connectors to the solenoids.
Install the oil temperature sensor with the holder and the screw. Note that the length of the screw is given in mm. Tighten to 10 Nm.
Install the cable harness on the holder. Check that the cable harness is correctly positioned.
Reinstall. See Temperature sensor fluid, transaxle, (TFT) See: Sensors and Switches - A/T/Transmission Temperature Sensor/Switch/Service and Repair.
